HYDRAULIC FILTERS & FILTER HEADS | BREATHER CAPS
Cellulose Hydraulic Filter Elements
• The cleanliness factor is the expected increase in performance as a multiplier over baseline cellulose filtration.
• Cellulose media provides effective filtration for a wide variety of petroleum-based fluids.
HYDRAULICS
Length (in.) Beta Ratio
Micron Rating
(micron)
Average Cleanliness
Cleanliness Factor
Expectation
Filter Thread Size Wt. (lb)
ITEM
PRICE
3.26
2/1,000
7/23
23/20/14
1
3/4 in.-16 UN
0.7
8155327
16.99
5.35
2/1,000
7/23
23/20/14
1
1 in.-12 UN
1.1
8038651
19.99
7.87
2/1,000
7/23
23/20/14
1
1 in.-12 UN
1.6
8199051
29.99
6.66
2/1,000
7/23
23/20/14
1
1-1/2 in.-16 UN
2.4
8038704
36.99
10.66
2/1,000
7/23
23/20/14
Hydraulic|Filters
1
1-1/2 in.-16 UN
3.2
8155335
49.99
Filters|Hydraulic
Filter|Heads
A) Synteq Hydraulic Filter Elements
Heads|Filter
• The cleanliness factor is the expected increase in performance
as a multiplier over baseline cellulose filtration.
Breather|Caps
• The Synteq media’s uniform synthetic fibre structure delivers a higher filtration efficiency than
Caps|Breather
cellulose which removes more dirt and contaminants quicker.
The smooth, rounded fibres
A
B
provide low resistance to fluid flow, making the hydraulic system more efficient.
Length (in.) Beta Ratio
Micron Rating
(micron)
Average Cleanliness
Cleanliness Factor
Expectation
Filter Thread Size
Wt. (lb)
ITEM
PRICE
5.35
1,000
11
19/17/13
16x
1 in.-12 UN
1.2
8241218
49.99
7.87
1,000
11
19/17/13
16x
1 in.-12 UN
1.6
8038642
59.99
10.7
1,000
11
19/17/13
16x
1 in.-12 UN
3.5
8283368
119.99
B) Water Absorbing Hydraulic Filter Elements
• Water-absorbing media is formulated with absorbents and resins to remove moisture and condensation from petroleum-based fluids.
• Water concentrations in hydraulic oil as low as .1% can accelerate component wear by as much as 50%. If the hydraulic oil is cloudy, it could
have a water concentration of 1% or higher and needs to have the water removed immediately to prevent component damage or failure.
Length (in.)
Micron Rating (micron)
Filter Thread Size
Wt. (lb)
ITEM
PRICE
5.35
10
1 in.-12 UN
1.5
8038688
27.99
10.66
10
1-1/2 in.-16 UN
3.4
8155343
69.99
C
D
E
F
In-Line Filter Heads
Pressure Rating (PSI): 150
Max. Flow Rate Connection Size
(GPM)
(in.)
Connection
Type
Filter Thread Size
Filter Element
Length (in.)
Bypass Pressure Wt. (lb)
(PSI)
ITEM
PRICE
C
4
3/8
NPTF
3/4 in.-16 UN
3.4
-
0.2
8076085
16.99
D
5
1/2
NPTF
1 in.-12 UN
5.35 and 7.87
25
0.6
8076069
19.99
E
10
3/4
NPTF
1 in.-12 UN
5.35 and 7.87
25
0.5
8006258
24.99
F
25
1-1/4
NPTF
1-1/2 in.-16 UN
6.7 and 10.7
25
1.7
8006267
34.99
TECH TIP
Thread-On Breather Caps
• Airflow (CFM): 10
• Filter Rating (micron): 40
Connection Size
Connection Type
Wt. (lb)
ITEM
PRICE
3/8 in.
NPTM
0.1
1250090
11.99
1/2 in.
NPTM
0.3
1250092
17.99
3/4 in.
NPTM
0.5
1250093
22.99
1 in.
NPTM
0.7
1250094
27.99
520
FILTERS
Change your filter when all of it’s dirt-holding
capacity is used up, but before the bypass valve opens.
This requires a mechanism to monitor the restriction to flow
(pressure drop) across the filter element and alert you when
this point is reached.
National Call Centre: 1-800-665-8685 | Proudly Canadian since 1933