HYDRAULIC 12V DC DIRECTIONAL CONTROL VALVES | ACCESSORY VALVES
HYDRAULICS
A
B
Line Check Valves
• Permits oil flow in 1 direction only.
• Poppet style for less leakage than standard ball types.
• Used to isolate a circuit, provide component protection. ie.
(cooler bypass)
• Pressure Rating (PSI): 5,000
• Cracking Pressure (PSI): 75
High Pressure Needle Valves
• ORB cylinder ports provide zero leakage at high pressure.
Lightweight, high-pressure, corrosion-resistant aluminum
body. Hardened poppet and seat for long life.
• Use to restrict or shut off hydraulic flow within a hydraulic
circuit. The backpressure created by this valve must be taken
into account when designing your application. The incoming oil
flows from the inlet port to the outlet port. Turning the handle
clockwise will gradually restrict the flow until it is shut off.
• Pressure Rating (PSI): 3,000
• Connection Type: ORBF
Flow Rate (GPM)
Connection Size
ITEM
PRICE
A
12
8
8689507
49.99
B
30
8
8689515
89.99
Flow Rate
(GPM)
Connection
Size
Connection Type
ITEM
PRICE
10
3/8 in.
NPTF
8261455
26.99
14
1/2 in.
NPTF
8261463
29.99
C
D
Spool Style Divider/Combiner Flow Control Valves
• ORB cylinder ports provide zero leakage at high
pressure. Lightweight, high-pressure, corrosion-resistant
aluminum body.Needle
PressureValves
compensated to divide/
combine flow regardless
of pressure
Line|Check
Valves differences.
• Use to extend/retract
cylinders at the same speed or run
Check2Valves|Line
2 motors at the same RPM. The incoming oil flow will be
Gear|Flow
Divider/Combiners
equally divided Rotary
or combined
between
the 2 outlet ports.
• Pressure RatingFlow
(PSI): Divider/Combiners
3,000
• Connection Type:
ORBF
Spool
Style|Flow Divider/Combiners
Rotary Gear Flow Divider/Combiners
• Designed to raise and lower unequal loads at the same speed.
Built-in differential relief valves to synchronize cylinders and
protect against excessive differential pressure. Efficient design
resulting in very little pressure drop or heat generation.
• Use to lift tables, levelling legs, presses, shearing machines, etc.
• Pressure Rating (PSI): 3,500
• Connection Size: 10
• Connection Type: ORBF
Type
Flow Rate (GPM)
C
2-Section
2.9 to 13.2
D
3-Section
9 to 18
DirectionalConnection
Control Valves|Cartridge
Flow Rate (GPM)
Size
ITEM Style
PRICE
3
6
8688871
109.99
PRICE
6
6
8688889
109.99
8524852
269.99
12
8
8688905
109.99
9077561
379.99
16
8
8688921
109.99
Application
ITEM
PRICE
ITEM
E
F
12V DC Cartridge Style Directional Control Valves
• Corrosion-resistant aluminum body
• Continuous-duty solenoid
for extended use
Type
E
• Pressure Rating (PSI): 3,000
• Inlet Port(s): 8 ORBF
• Outlet Port(s): 8 ORBF
Flow Rate (GPM) Working Port(s)
2-Position, 2-way
normally closed
10
-
Use to turn the hydraulic oil flow off or on within the
hydraulic system. The incoming oil flow is shut off, but
flows through the valve when the coil receives power.
8688822
79.99
2-Position, 2-way
normally open
6
-
Use to turn the hydraulic oil flow off or on within the
hydraulic system. The incoming oil flows through the
valve, but shuts off when the coil receives power.
8688830
79.99
2-Position, 3-way
6
-
Use to switch the incoming hydraulic oil flow
between 2 hydraulic circuits. The incoming oil flows
through 1 outlet port then switches to the other
outlet port when the coil receives power.
8688848
109.99
8 ORBF
Use to extend/retract a hydraulic cylinder or reverse a
hydraulic motor. There is no neutral position, so the motor
will always be in motion and the cylinder will always be
under pressure. When the coil receives power the valve will
shift and reverse the oil flow to the cylinder or motor.
8688855
129.99
8 ORBF
Use to extend and retract a hydraulic cylinder or reverse
a hydraulic motor. The incoming oil flow will travel
from pump to tank when the coils receive no power.
When either coil receives power, the valve will shift
and reverse the oil flow to the cylinder or motor.
8688863
199.99
2-Position, 4-way
F 3-Position, 4-way
tandem centre
6
5
24
Find everything to transfer hydraulic or mechanical power!